SBC CHEVY ENGINE BOLTS KIT STAINLESS SMALL BLOCK 265 283 305 327 350 400 HEX SET

Description

Chevy 265, 283, 302, 305, 307, 327, 350 and 400
Stainless Hex Engine Bolt Kit
The image above shows all of the fasteners we ship in this kit except the Crank & Fan Pulleys.
THIS IS THE LARGEST KIT ON THE INTERNET FOR THIS ENGINE.
Dress Up Your Small Block Chevy Engine with our 205 Piece stainless steel
hex bolt kit!!
This Bolt Kit Fits All 265, 283, 302, 305, 307, 327, 350, and 400 Chevy Engines. (Non-EFI)
Does not Fit Vortec or EFI engines.
Let us know at the time of payment if you have a Short Water Pump or Center Bolt Valve Covers.  We send for a Long Water Pump and Perimeter Style Valve Cover bolts standard.
These are the finest stainless steel bolt kits available.  We also offer 304 Stainless Allen kits and grade 8 stainless
ARP
kits for more applications than anyone.
Our kits are also available
Polished
with the stamps and marks still on the heads, but they are shined to a very high shine.  We also offer our
Show Polishing
.  We remove all stamps and marks and polish the heads to a mirror finish.  The bolts have the appearance of Chrome without the headaches.  Let us know if you want either of these services at the time of ordering and we can price this for you.
This is a complete high quality stainless steel bolt kit.  Included is individually packaged and labeled component kits for the following:
Intake Manifold
Timing Cover
Water Pump
Oil Pan
Crank Pulley
Fan Pulley
Thermostat Housing
Distributor
Coil Bracket
Fuel Pump
Valve Covers
Headers (Allen Bolts)
Carb Stud Kit
If you are using aftermarket parts on your engine, let us know and we will custom build a kit that fits your combination!  Please include a note with your payment listing all modifications you want us to make on your kit.
The carb stud kit is designed to fit
Carter, Edelbrock, Holley or any Throttle Body
with a 1/2 inch thick base plate.  The studs have an internal hex and a 3/16 Allen wrench is used to install them into your intake manifold.  We also include flanged hex nuts and the proper size flat washers.
If you are using a
Quadrajet
carb , just let us know with your payment and we will include a mounting bolt kit for you!
We use our thick washers in this kit.  These washers are thicker and have a smaller center hole to keep the washer centered on the bolt.  Our washers are custom made for us in the
USA
to our specs.
Our flat washers give more support to your engine components.  We also add split lock washers on some of the co
mponent kits to make sure things stay tight.
The thin small diameter washers other sellers use offer almost no support and will cause your valve cover or oil pan rails to bend.  If this occurs, the
gasket will
pinch and you will have oil leaks.
All of our washers are polished to make sure your finished project looks great!
The Alloy Boltz Guarantee.
You will not find a better looking, a better fitting kit, or a more detailed kit anywhere near our price!  If you are not completely satisfied with our kit, we will gladly give you a 100% refund of your purchase price.
We accept Pay Pal, Visa or MasterCard Credit Cards.
Please use Ebay’s shipping calculator to find or check your
actual
shipping cost.
Kits going to Alaska, Hawaii, and Puerto Rico will be shipped via USPS Priority.
You can pay us securely with any major credit card through PayPal.